You pick the shop. Not the insurer.
Every state lets you choose the repair facility. The insurer-preferred shop is one option. The shop your mechanic trusts is another. The one five minutes from your office is another still. We route your request to shops that work with your insurer, write real estimates, and will tell you if the quote the adjuster handed you is light.
The first estimate is a draft. The real one has supplements.
The number the adjuster quotes you is almost never the number the shop finally bills. Here is why that is normal, and when it is a problem.
The initial estimate is written from photographs or a walk-around in the lot. The adjuster lists what they can see: the panel, the bumper cover, the headlight. They do not list what is behind the panel, because it has not been pulled apart yet. Shops call the first number a drive-in estimate, and it is almost always light.
Once the car is in the bay and the shop pulls the bumper cover, the real damage shows: a cracked radiator support, bent inner structure, airbag sensors that fired, a cooling line that needs replacing. The shop writes a supplemental estimate and sends it to the insurer. Supplements are normal. One or two per claim is typical. Five is a sign the first estimate was deliberately light.
The shop runs this back-and-forth so you do not have to. If the insurer refuses a supplement, the shop fights it. If they will not, that is a shop that works for the insurer, not you. How a collision repair estimate works walks the full back-and-forth.
OEM, aftermarket, LKQ. Which parts get used.
Three categories of replacement parts. Which one your shop uses is a choice, and insurers push the cheapest one.
OEM. New, from the manufacturer. The exact part your car was built with. Most expensive, longest to ship on uncommon models, and the one the manufacturer's warranty expects.
Aftermarket. New, from a third-party supplier. Fitment is usually fine on common parts; paint match on a bumper cover can be a problem; crash-structure parts are a harder question because they are what absorbs energy in the next crash.
LKQ (Like Kind and Quality). Used, pulled from a wrecked car of the same model. Fine for a door shell or a tail light. Not fine for a crush zone, an airbag, or anything with wiring.
Most insurance policies allow the insurer to specify aftermarket or LKQ on parts outside the crash structure. You can insist on OEM, and if the policy covers it, the shop will write for OEM. If the policy does not, you pay the difference. The shop should tell you which is which before the work starts.
ADAS calibration. The quietest line on the invoice, and the one that matters most.
Modern cars have sensors in bumpers, windshields, and side mirrors. After a crash, those sensors move. If they are not recalibrated, the car's assist systems lie.
ADAS stands for Advanced Driver-Assistance Systems: adaptive cruise, lane-keep, automatic emergency braking, blind-spot monitoring, 360-degree cameras. Each of those relies on sensors mounted in body panels. A collision shifts the panel, and the sensor's reference frame shifts with it.
The fix is a calibration procedure run after the body repair is complete. There are two kinds. Static calibration happens in a shop bay with targets painted on boards at exact distances. Dynamic calibration happens on a specific stretch of road at a specific speed with the scanner connected. Either one takes time and specific equipment, and the invoice line reads like a hundred-dollar fee or a thousand-dollar one depending on how many systems need it.
If the estimate does not list calibration and your car has any of those features, ask about it before you sign. A shop that skips calibration to make the number look better is handing you a car that brakes too late at a crosswalk.
Pick a shop. We'll make the introduction.
Tell us where you are and what the car is. We route your request to shops in your area that work with your insurer and write real estimates.