Wraps built for the shoulder, not the trade show.
The trucks you own are the biggest billboards you'll ever rent, and every one of them is parked in front of 10,000 drivers a day. The specimen below is a flatbed and a heavy-duty wrecker, both wrapped for Big Rig Rescue. Numeral height set to read at 300 feet. DOT marks at FMCSA minimum. One shield across the fleet.
Big Rig Rescue — two trucks, one brand.
Fictional operator, real wrap layout. The flatbed below is a side view of a Freightliner M2 112. The wrecker is a Peterbilt 335 with a 25-ton integrated unit. Door, cab, bed, and boom zones are all treated. Color key sits beside the layout.
A. Flatbed carrier · Freightliner M2 112
B. Heavy-duty wrecker · Peterbilt 335 (25-ton)
Color key · fleet system
Everything in the package.
- Full-side wrap design for each truck type in your fleet
- 3M IJ180Cv3 cast vinyl with 3M 8519 overlaminate, 7-year rated
- Door, cab, bed, and boom treatment laid out per truck VIN
- FMCSA-compliant USDOT, MC, and state operating numerals
- Numeral height set for 300-foot shoulder legibility
- Controlled-booth install, one day per flatbed, two days per heavy-duty
- Color system with PMS, CMYK, and 3M vinyl codes for reorder
- Illustrator source files, print-ready production files, you own them
- Reprint pricing for the second and third truck quoted up front
The shoulder is the only billboard that pays.
A wrapped truck is a demand surface the whole corridor pays for by passing it. The right design does the work; the wrong design is a sticker that peels.
Phone legibility holds at 300 feet.
Door numerals at 10-inch cap height, bed numerals at 14-inch, both set in a condensed grotesque with the stroke weight tuned for highway speed. Passing drivers remember the number without needing a second pass.
Cast vinyl survives real tow life.
Flatbeds and wreckers live outside, in salt, with abrasion from strap loading. Calendared vinyl shrinks around the edges inside a winter. 3M cast with 8519 lamination holds its print for the 7-year warranty, and we've seen it past 9 on garaged trucks.
The fleet reads as one operator from any angle.
Boom, bed, door, cab — same shield, same proportion, same amber. A dispatcher who sees your truck at an angle on the shoulder knows which operator placed it. So does the carrier whose load you just moved.
Wraps are one surface. Pair them with the print bundle so the driver card hands the same brand to the officer, with direct mail for the fleet manager's corkboard, and with brand identity if the shield still needs a redraw.
What dispatchers ask before signing.
What truck types do you wrap?
Light-duty roll-ons, flatbeds, heavy-duty wreckers, rotators, and support rigs. Any truck with usable door, cab, bed, and boom area. We've wrapped Peterbilt 335, Freightliner M2 112, Kenworth T880, and Hino 268A on recent runs.
What material do you use?
3M IJ180Cv3 cast vinyl with 3M 8519 overlaminate. Both are rated for 7 years outdoor on vertical surfaces, which matches how a tow truck actually lives. We do not run calendared vinyl on recovery vehicles — the shrink is wrong for the stress on the panels.
How long does install take?
Flatbed: one day in the booth. Heavy-duty wrecker with boom and bed: two days. We stage install in a controlled booth, not outdoors, because adhesion on a cold truck is where cheap wraps fail inside the first winter.
Can we read the phone number at 70mph?
Yes. Numerals set at 10-inch cap height on the door and 14-inch on the bed. Legible at 300 feet in daylight, which is the shoulder distance for most passing drivers who need to see it.
Will the wrap meet FMCSA markings?
Yes. USDOT, MC, and state operating numerals are placed on the driver's side door at or above the minimum height in 49 CFR 390.21, in the required contrast ratio to the base vinyl. We measure every truck before layout.
How much does it cost?
Flatbed full wrap runs $3,800 to $4,600 depending on body length. Heavy-duty wrecker runs $6,200 to $8,400 depending on boom treatment. Half-wraps and door-only options are quoted separately.
What happens when we replace a truck?
Design files are yours. The vinyl print re-cut for the new chassis is a $700 to $1,100 fee against the same files. Install day is the same. We do not resell your design to anyone.
Services that pair well.
Book the first truck, size the fleet after.
Pick a plan, send us a VIN, and the first truck is in the booth inside three weeks. Reorder for the rest of the fleet runs 20% cheaper per truck against the same design files.